Digital prototyping with Autodesk® Inventor® software enables users to engineer, visualize, and simulate their products digitally to design and build better products in less time.

For General Part and Assembly Design (Typically Fewer than 1,000 Parts):

    * Microsoft® Windows Vista® (SP1) (32-bit or 64-bit) Home Basic, Home Premium, Business, Enterprise, Ultimate Operating System(1,2,3)
      or
    * Windows® XP Professional (SP2 and SP3) or Professional x64 Edition (SP2) Operating System(1,2,3)
    * Intel® Pentium® 4 processor, 2 GHz or faster, Intel® Xeon™, Intel® Core™, AMD Athlon™ 64, AMD Opteron™, or later(4)
    * 2 GB RAM minimum(5)
    * Direct3D10, Direct3D 9 or OpenGL capable graphics card(6,7)
    * DVD-ROM drive(8)
    * Microsoft Mouse compliant pointing device
    * 1280 x 1024 or higher screen resolution
    * Internet connection for web downloads and Subscription-aware access
    * Adobe® Flash® Player 10(9)
    * Microsoft Internet Explorer 6.0 through 7.0
    * Microsoft Excel 2003 through 2007 for iComponents, thread customization, and spreadsheet-driven designs

For Complex Models and Large Assemblies (Typically More than 1,000 Parts):

    * Windows XP Professional x64 Edition (SP2) or Windows Vista 64-bit (SP1)
    * AMD64 or Intel® 64 processor
    * 6 or more GB RAM
    * CAD workstation-capable graphics card

    * DVD-ROM drive(8)
    * Microsoft Mouse compliant pointing device
    * 1280 x 1024 or higher screen resolution
    * Internet connection for web downloads and Subscription-aware access
    * Adobe Flash Player 10(9)
    * Microsoft Internet Explorer 6.0 through 7.0 

    * Microsoft Excel 2003 through 2007 for iComponents, thread customization, and spreadsheet-driven designs

Notes

(1) For installations of Inventor 2010 with local content libraries and/or Autodesk Vault 2010 access. Please see the Autodesk Data Management system requirements for remote server installations for sharing content libraries and/or Vault data between multiple-users.

(2) Inventor 2010 and AutoCAD Mechanical 2010 applications are each provided both as 32-bit applications and as 64-bit applications for installation and use on the corresponding operating system only. Autodesk Vault Explorer 2010 is a 32-bit application for installation and use on either a 32-bit or 64-bit operating system. (Both) The 32-bit and 64-bit versions of these applications are all provided together on the installation media.

(3) Autodesk Inventor/AutoCAD Mechanical design applications and Autodesk Vault must all be the same language on a given computer. English versions of these applications will run on any language operating system. Versions of these applications in other languages will run on operating systems of that same language.

(4) Autodesk Inventor 2010 has been optimized to take advantage of the SSE2 extended instruction sets supported on Pentium 4, AMD Athlon 64, and AMD Opteron processors. Inventor 2010 will not install on computers that do not support SSE2. Several utilities are available on the Internet that report CPUID, including supported instructions sets.

(5) Autodesk recommends settings that allow Microsoft Windows to manage virtual memory, as needed. There should always be at least twice as much free hard disk space as system memory (RAM).

(6) Please refer to the Autodesk published graphics card information.

(7) OpenGL graphics hardware acceleration is available only in legacy feature support mode by Microsoft for Windows XP Professional only. Direct 3D is not recommended for use with Windows XP 32-bit with the 3GB memory switch on.

(8) Inventor 2010 is available only on DVD media (or electronic download in some situations). CD media is no longer available. DVD-ROM drive is not required if installing using electronic download. However to accommodate the installation files, you will need 9 GB of hard disk space and an additional 16 GB of space for temporary files created during the installation.

(9) The multimedia learning components of the Inventor Help system require that you have Adobe Flash Player 10 installed. If it's not already installed, download it from the Adobe website.

signup on at https://students8.autodesk.com/?nd=register voor Serial Number and Product Key